your system will ‘simulate’ the MAC entered as real, but the MAC stored in the hardware will not be altered. Your modification will be ‘virtual’, i.e. NOTE: as mentioned at the beginning, the MAC is stored by the firmware houses in the network card chips, and is not permanently alterable.

open the prompt as administrators (start>see ‘cmd’>right click>run as administrator) To check what are the MAC addresses of our network cards: If you have a MAC address of which you would like more details, such as the name of the manufacturer, please go to this site. Once entered, click on OK and restart the system.Īny combination can be entered: here is the official list to clarify what I’m talking about. ) the MAC address that you want to have.Į.g. Now select the empty field on the right and enter (without dashes – or : or. – Search for the tab “Advanced”, then select “Network service” or “Network address” In the group “Network adapters”, search for the card which you want to modify the MAC for Open Device Manager (on Windows 10: right click on start menu’s logo)

If you need to change the MAC of a specific network card (for various reasons, such as to by pass a filter in our router), you should proceed as follows.

(to find out which ones they are, skip to ‘Verify’) Since each network card ha s its own MAC address stored, you will have more addresses in our wifi -Bluetooth-etc… computers. The IEEE (Institute of Electrical and Electronics Engineers) has created this address predicting saturation around 2100 (since 281,400 billion different combinations are available). The first 3 bytes are the identifier of the manufacturer, the last 3 bytes represent a specific unique subaddress. It is assigned by the manufacturer of the card at the time of its creation and is unique for each card. MAC stands for Media Access Control and consists of a 6 byte (48 bit) long code. The MAC address (or MAC Address) is used by network cards to identify themselves in the exchange of information.

Why change network mac address